TYPES OF DRIVE TRAIN SYSTEM

-

 There are four different types of drivetrains: all-wheel drive, four-wheel drive, front-wheel drive, and rear-wheel drive. Today, the Waxahachie auto repair experts at Christian Brothers Automotive are going to explain the four different types of drivetrains and why they matter.

ALL-WHEEL DRIVE (AWD)

The all-wheel drivetrain system has fluid-filled differentials and advanced electronics enabling the engine to send power to all four wheels. This provides a vast and highly improved capability for driving on wet or slippery roads. Examples of vehicles with AWD include the Subaru Legacy and the Acura RL.

FOUR-WHEEL DRIVE (4WD)

The four-wheel drivetrain is similar to AWD in that the engine’s power is sent to all four wheels. However, 4WD is typically more robust because it’s designed to handle off-road driving. Examples of vehicles with 4WD include the Range Rover or the Ford F150.

FRONT-WHEEL DRIVE (FWD)

A car or truck with front-wheel drive has all of the engine’s power being sent to the two front wheels, so the drivetrain is basically pulling the car down the road. This serves to give the car more traction, providing stability, predictability and dependability when the roads get a little icy. Examples of vehicles with FWD include the Toyota Camry and the Honda Accord.

REAR-WHEEL DRIVE (RWD)

With rear-wheel drive, all of the engine’s power is sent to the back two wheels. Opposite of cars with FWD, a car with RWD is being pushed down the road. This does not work well in areas with icy winters because the level of traction is low. Despite this, RWD provides balance and offers superior braking and handling. Examples of vehicles with RWD include the Lexus IS Series and the BMW 3 Series.

Comments

Post a Comment

Popular posts from this blog

Alternating Current

-
Image
  What Is Alternating Current? An  alternating current  can be defined as a current that changes its magnitude and polarity at regular intervals of time. It can also be defined as an electrical current that repeatedly changes or reverses its direction opposite to that of Direct Current or DC, which always flows in a single direction as shown below From the graph, we can see that the charged particles in AC tend to start moving from zero. It increases to a maximum and then decreases back to zero completing one positive cycle. The particles then reverse their direction and reach the maximum in the opposite direction after which AC again returns to the original value completing a negative cycle. The same cycle is repeated again and again. Alternating currents are also accompanied usually by alternating voltages. Besides, alternating current is also easily transformed from a higher voltage level to a lower voltage level.
Read more

SOLAR TRANSFORMERS

-
Image
  The transformers required for wind power and solar DPV require special design features to meet the challenging operating conditions. The industry today has developed different types of transformers for the application. The last few decades have seen very rapid development of renewable energy, especially, distributed photovoltaic (DPV) and wind power. It is estimated that at least 40 per cent of electricity generation by year 2040 would be from renewable energy sources and this would give appreciable reduction of the present level of carbon dioxide emissions of about 10 billion tons per year. The transformer industry is rising to this challenge and has developed special transformers for the DPV generation and wind generation. Transformers are critical components in solar energy production and distribution. Historically, transformers have ‘stepped-up’ or ‘stepped-down’ energy from non-renewable sources. There are different types of solar transformers including distribution, station, su
Read more